GB 
MS 
TH 
PH 
ID 
VI
TECHNICAL DATA BIV-LUB®
- Wrapped composite sliding bearing steel / bronze.
- Solid lubricant pockets.
- Maintenance-free
- DIN 1494 / ISO 3547
- All special designs are produced at short notice!
- Cylindrical bushing, thrust washer and strips are standard fabrication.
- Punchings and moldings are produced to customer requirements.
| PROPERTIES | High load capacity at low abrasion, excellent suitable at low sliding speeds and oscillating movements, maintenance-free. |
| MATERIALS | |
| Support material | Steel copper-plated |
| Sliding layer | CuPb10Sn10 Lubrication pockets are filled with solid lubricant |
| MATERIAL PROPERTIES | |
| Specific load capacity static | ≤ 200 [ N/mm² ] |
| Specific load capacity dynamic | ≤ 75 [ N/mm² ] |
| Sliding speed | ≤ 0,4 [ m/s ] |
| Friction value | 0,08 to 0,22 [ µ ] |
| Temperature strain | ≤ 200 [ °C ] |
| Max. Pv - value | 2,8 [ N/mm² x m/s ] |
| TOLERANCE DETAILS | |
| Housing – Ø | H7 |
| Bushing after mounting | H9 |
| Shaft tolerance | f7 to h8 |
| SHAFT MATERIAL | Steel, hardened or untempered, surface roughness ≤ Rz 6,3 |
| MOUNTING ADVISE | |
| Housing – Ø | Mounting bevel, min. 1,5 mm x 15-45° |
| Shaft | Mounting bevel, 5 mm x 15°, edges rounded |
| Force fitting mandrel | The application of an adequate force fitting mandrel is advisable. Maybe grease lubrication of the outer surface is necessary when mounting. |
| MAINTENANCE | BIV-LUB® is a maintenance-free composite sliding bearing with solid lubricant pockets, but primary lubrication is necessary. Therefore an ageing resistant lithium stiffened grease should be used. |