GB
TECHNICAL DATA FLO-MAS®
- Water-lubricated pump bearing
- Various rubber linings available
- Metallic and non-metallic bearing shells
- Cylindrical bushings and flanged bushings are standard fabrication
- We produce all special designs at short notice!
| PROPERTIES | Suitable for water lubricated applications like pumps and propeller shafts. |
| MATERIALS | |
| Support material | Various metallic and non-metallic materials available (pls see a detailed list in our download PDF) |
| Sliding layer | Polyurethane, Nitrile Rubber (NBR), optional Butyl, Ethylene and Propylene (EPDM) |
| MATERIAL PROPERTIES *** | |
| Specific load capacity dynamic | ≤ 4 [ N/mm² ] |
| Sliding speed | < 35 [ m/s ] dry |
| TOLERANCE DETAILS | |
| Housing – Ø | Specified by the customer |
| Bushing after mounting | Specified by the customer |
| Shaft tolerance | Specified by the customer |
| SHAFT MATERIAL | Various stainless steel grades suitable for the application and medium |
| MOUNTING ADVISE | |
| Housing – Ø | Mounting bevel, min. 1,5 mm x 15-45° |
| Shaft | Mounting bevel, 5 mm x 15°, edges rounded |
| Force fitting mandrel | The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting. |
| MAINTENANCE | FLO-MAS® needs water lubrication! |
| *** | The above mentioned material properties are valid for optional operating conditions. Through changes of the application conditions e.g. higher sliding speed or strain, these values are subject to change. |