GB
TECHNICAL DATA TEX-MET®
- Wrapped composite sliding bearing with PTFE fibres fabric overlay
- Maintenance-free dry sliding bearing
- DIN 1494 / ISO 3547
| PROPERTIES | Excellent sliding and wear behaviour, especially in case of rotating and oscillating movements, good shock absorption, very high load capacity, no water absorption. |
| MATERIALS | carbon steel, stainless steel and bronze |
| Sliding layer | PTFE fibres fabric |
| MATERIAL PROPERTIES * | |
| Specific load capacity static | ≤ 350 [ N/mm² ] |
| Specific load capacity dynamic | ≤ 180 [ N/mm² ] |
| Sliding speed | < 0.5 [ m/s ] |
| Friction value | 0,03 to 0,20 [ μ ] |
| Temperature strain | -50 to +250 [ C° ] |
| Max. Pv - value | 1,8 [ N/mm²*m/s ] shortly 3,6 |
| TOLERANCE DETAILS | |
| Housing – Ø | H7 |
| Bushing after mounting | H9 |
| Shaft tolerance | h8 |
| SHAFT MATERIAL | Steel, hardened or untempered, surface roughness < Rz 4 |
| MOUNTING ADVISE | |
| Housing – Ø | Mounting bevel, min. 1,5 mm x 15-45° |
| Shaft | Mounting bevel, 5 mm x 15°, edges rounded |
| Force fitting mandrel | The application of an adequate force fitting mandrel is advisable. Maybe grease lubrication of the outer surface is necessary when mounting. |
| Stick in | Adhesive should not contact the sliding surface. |
| MAINTENANCE | TEX-MET® is a dry sliding bearing with glued PTFE fibres fabric overlay. Lubrication is therefore not necessary and not allowed. |
| * | As a special design additional sliding alloys are available. |